VELOSIT® CP 200

Cementious Concrete Primer

VELOSIT CP 200 is a cementitious primer for concrete, masonry and steel. It is designed as bonding bridge for the VELOSIT RM repair mortars on critical substrates.

Typical applications:

  • Priming of concrete and masonry for VELOSIT-mortars and -screeds
  • Prime coat to fill blow holes, honeycombs and surface roughness
  • Can be used for vibrated floor systems as a bonding bridge between tiles and mortar bed

Properties:

  • Minimal shrinkage/expansion under dry resp. wet curing conditions
  • 30 min. working time and 12 MPa compressive strength after 4 hours
  • Final strength of more than 45 MPa (6525 psi) after 28 days
  • Very good adhesion to concrete and masonry 
  • Good resistance against aggressive media with a pH range of 3–12 and against soft water with low ion content
  • Good sulfate resistance
  • Increased resistance against aggressive media with a pH range of 3–12 and against soft water with low ion content

Downloads

Here you can find detailed information about the selected VELOSIT product.


Technical Data Sheet

Associations & Memberships: