VELOSIT® TA 704
Thin & Medium Bed Tile Adhesive C2TE, normal setting
VELOSIT TA 704 is a cementitious tile adhesive for a wide variety of tiles and natural stones on typical construction substrates like dry wall, screeds, concrete and masonry.
Typical applications:
- On cementitious, magnesite and gypsum-based floor screeds
- On gypsum board walls, plaster, concrete and masonry
- In swimming pools (over waterproofing layer)
- In wet rooms, showers and kitchens
- Interior and exterior applications
Properties:
- Long pot life
- Surpasses the requirements of EN 12004, Class C2TE
- Mortar bed thickness between 2 and 12 mm (1/12“ to 1/2“)
- 30 min. open time and 0.5 MPa (73 psi) adhesive strength after 24 hours
- Very good adhesion to most construction substrates
Downloads
Here you can find detailed information about the selected VELOSIT product.